
PMBus-capable power-management slave — live command-byte protocol, OV/UV fault detection, lockstep-safe. It is delivered as a licensable soft-IP block engineered as an ASIL-B Safety Element out of Context — not just RTL, but the complete functional-safety work package needed to carry it into an ISO 26262 program:
A synthesizable PMBus-capable power-management slave soft-IP — interprets the PMBus command byte live within the bus transaction (write command-code, repeated-START, read the response — one continuous transaction) so a “PMBus Read Word” completes at real PMBus timing, not after a round-trip through a software layer.
PMBus Power System Management Protocol Specification (subset, v1); SBS SMBus Specification v3.2
ASIL-B (SEooC) · SPFM 90.70% · LFM 89.15% · PASS
ISO 26262:2018 · FMEDA available · Safety Manual included
| Offset | Register | Description |
|---|---|---|
0x00 | CTRL | RW [0]=EN [1]=PEC_EN [2]=STRETCH_EN |
0x04 | ADDR | RW [6:0]=7-bit slave address |
0x08 | THRESH_OV | RW [15:0]=OV fault threshold (linear16 raw) |
0x0C | THRESH_UV | RW [15:0]=UV fault threshold (linear16 raw) |
0x10 | STATUS | RO/W1C [0]=CML(W1C,mirrors err_code3) [1]=BUS_TIMEOUT(W1C,mirrors err_code4) [2]=VOUT_OV_FAULT(RO mirror) [3]=VOUT_UV… |
…3 more registers — see datasheet for the full table.
// Minimal instantiation
pmbus_dev #(
.ADDR_W(6)
) u_pmbus_dev (
.clk (clk),
.rst_n (rst_n),
// APB4
.p_paddr (paddr),
.p_psel (psel),
.p_penable (penable),
.p_pwrite (pwrite),
.p_pwdata (pwdata),
.p_prdata (prdata),
.p_pready (pready),
// Safety
.err_clear (1'b0),
.err_valid (err_valid),
.err_code (err_code)
);Configure via the CTRL register after reset to enable the IP and set operating parameters. Monitor err_valid / err_code for any safety faults reported by the built-in safety monitor.
Typically deployed in in-vehicle networks, industrial gateways, and sensor/actuator links where a bus controller has to carry its own safety argument.
Pricing, the per-IP FMEDA, safety manual, and RTL data room are shared under a mutual NDA.
Figures are pre-silicon engineering-grade estimates for a Safety Element out of Context (SEooC); final ASIL sign-off is the integrator’s, supported under NDA. FMEDA and Safety Manual available under NDA.
circuit-design.space · +1-971-357-1400 · anovickis@circuit-design.space